Hire a professional to audit your energy consumption. This will enable you to understand your appliance usage and determine where the loss occurs.

Conserve Lighting. Turn off lights in rooms that are not in use. Switch to energy-efficient light bulbs, and use a dimmer switch or motion sensors.

Reduce temperature setting. Lowering your thermostat even by one degree can make a difference. Experts recommend 68 degrees Fahrenheit. Control your heat use in each of your rooms with a programmable thermostat. If still drafty, hang drapes and blinds to retain heat. Use cold water for laundering whenever possible.

Disconnect appliances not in use. Power, although at a lower level, still surges; thus, energy is still in use. Use a power strip that is easier to turn off when not in use. Unplug items not constantly in use, such as toasters, blenders, and blow dryers.

Avoid overcharging your electronic devices. When your phone is 100% charged yet still connected to the charger, the electricity is still running.

Keep appliances clean for better usage. Getting rid of dirt, dust, and grime can help them operate more effectively. Periodically update your refrigerator, microwave, and other equipment as needed.

Weather-proof your windows and doors. Check weather strips and sealing to prevent heat escape. Install storm doors for your front and back. Glass prevents thermal loss.

Use good insulation. It is especially important to use quality materials for your roof and heating ducts. Also, proper insulation of an attached garage will help keep heat from escaping. Air seal any cracks, gaps, and leaks. Provide extra insulation in older homes.

Pay attention to above and below you. Ceiling fans can ensure better air circulation in summer and winter, so that heat and cool air are evenly distributed. Providing suitable floorings, such as vinyl or carpeting, can help reduce heat loss.

Use energy-saving and low-usage technology and equipment. Use energy-saving modes when running your washing machine, dishwasher, and dryer. Turn off the heated dry setting on your dishwasher. Install low-water usage taps and showerheads. The less water you consume, the less energy you heat it. It’s also good practice to only run full loads, so you are not wasteful.

Look for alternatives to heat water. Solar or geothermal water heaters are the most economical.

Service your heating system. All systems accrue wear and tear with daily usage. Periodic servicing can keep them running efficiently. Clean and replace all filters.

Cut your energy costs and live more comfortably by taking some time to incorporate these adjustments. By carefully maintaining your household appliances, cutting waste, and consistently practicing conservative habits, you will see your energy usage and dollars well spent. You may have to incur some expenses to get there, but you will make your home more energy efficient in the long run.

Start simple with cleaning, painting, and other resurfacing

Always begin with sparkling up the floors, walls, fixtures, and cabinetry which you can easily do with minimal expense. Sanding and repainting, wallpaper, and retiling can give a new look to what has grown old and drabby. Also, replace old appliances and countertops when you can find items on sale. Another way to eliminate eyesores is to hide them with a photo or painting. You can also cheaply replace old handles, knobs, locks, and outlet plates with a newer style to create a unique look. If preferred, you can paint over these fixtures and tile and tubs. It’s important, though, to match the colors and style of your room, furniture, and appliances. Consult a professional to recoat ceramic, porcelain, or fiberglass.

Give the illusion of space, and don’t waste what you have

Do you have an unused room? Why not turn it into a functioning space, such as a comfortable den or extra bedroom? You can add new furniture, rugs, pillows, a TV, or a free-standing wardrobe closet. Add mirrors to a small area to make it appear more spacious. Install visible storage, such as floating shelves, to allow others to see the capacity. Rid your home of bulky furnishings to free up space.

Protect your home and property by reserving some autumn weekends to check the interior and exterior space for proper drainage, protection from winds, and insulation from the cold. You also want to ascertain that all your heating appliances are in tip-top shape. Here is a checklist to help you get through your maintenance schedule in time for the onset of old man winter.

INSULATE PIPES. Pipes that run along unheated areas can freeze and burst when temperatures drop to 32F and below. Protect them with foam or blown-in insulation you can purchase at a hardware store.

CLEAN OUT GUTTERS. Avoid clogs that can damage your shingles or roof. Use a strong ladder or get a handyman to help. Use work gloves to scoop out leaves and other debris that can block proper drainage. You can also purchase gutters with leaf guards to keep maintenance minimal.

DRAIN SPRINKLERS, UNHOOK HOSING, AND TURN OFF EXTERIOR FAUCETS. Like pipes, these can expand and crack when frozen. Remove any residual water or get help from a contractor who can blow out the water with compressed air.

INSTALL INSULATION. Block drafts by stripping around windows and door frames. Silicone caulk is best for exterior use because it is impervious to the elements. For baseboards, use paintable caulking.

GET YOUR FURNACE CHECKED. Hire an HVAC Contractor to inspect all parts and replace the filter with one that will easily trap particles. Ensure it is operating efficiently and that there is no carbon monoxide leakage.

FIREPLACE CLEANING AND INSPECTION. Gas fireplaces should be inspected every three years. However, wood-burning fireplaces require annual cleaning by a certified Chimney Sweep to prevent the ignition of soot build-up.

TEST YOUR SUMP PUMP. Slowly pour several gallons of water to check that it will turn one, especially during a previous dry season or before rainfall.

INSPECT YOUR ROOF. Check for damaged, loose, or missing shingles that could cause a leak from melting snow and storms. Hire a handyman for small repairs or a roofer for larger sections.

PREPARE FOR SNOW AND POWER OUTAGES. Be ready for an emergency and proper snow clearance. Restock rock salt and check that your snow removal tools are operational and in good condition. Have a generator handy in case you need a backup of power.

MAINTAIN OUTDOOR PLANTS AND TREES. Trim dead branches that could fall and cause major damage. Add mulch to insulate plant roots from low temperatures. Cut back perennials to eliminate harmful insects that may hibernate and resurface to impede spring growth.

Fall is fun for pumpkin carving, farm festivals, and comfortable, cool-weather hikes. Set some time to enjoy activities and appreciate nature. However, don’t put off the tasks needed to prepare and protect your greatest asset, your home. The fall months fly by, and before you know it, you are faced with the unforgiving harshness of mother nature. Be ready and armed with that first snowflake, a gust of wind, and a dangling icicle until you can let your guard down again in the spring.

Demographics Most Likely to Buy in the Fall

Serious homebuyers for this time are often millennials, empty-nesters, or relocated employees without children. Without having to consider a new school year, they are more apt to buy before the end of the year to lock in mortgage rates, avoid the hassle of a move in the winter weather, or get settled in a new location for their job before the start of a new year.

Firepit Considerations

First and foremost, you need to make sure that your firepit is safe. This involves not only installing a firepit unit that is structurally sound, but also installing it in a place that is stable so that the firepit won’t tip or shift in such a way that it could spill its contents or fall over. Regardless of whether the firepit is being installed on a deck, on your yard, or buried in the ground, safety and stability should be your primary concerns.

This could mean that you’ll have to do a bit of construction around the firepit or add stone or concrete underneath it to create a solid and stable surface for it to sit on. Once the firepit is in place, you’ll want to try moving it in different directions to make sure that it doesn’t shift or wobble. You should also inspect it for dents, cracks, or other signs of damage that could become a bigger problem down the road; you’ll want the firepit to be structurally sound before it’s installed, and if you see signs of damage now then you’ll want to get those repaired before you finish the installation.